Rockford Fosgate P300X1 | Punch 300 Watt Full-Range Mono Amplifier
- Availability: In Stock
- Brand: Rockford Fosgate
- Product Code: AMP-RF-P300X1
- Product viewed: 1114
-
$499.00
- Ex Tax: $433.91
Share:
The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
Features:
High level input capable with Auto Turn-On circuit
RCA pass-thru outputs
Features C.L.E.A.N. Set-up
Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
12dB/octave Butterworth crossover
On-board Punch EQ with +18dB boost @ 45Hz
Muted turn on
Stealth top mounted control panel
Cast aluminium heatsink
Short circuit protection
Over current protection
Specifications:
CEA-2006 Compliant
Number of Channels 1
Total Power (Sum of Rated Power) 300 Watts
Rated Power (RMS Continuous Power) 200 Watts x 1 @ 4-Ohm, 300 Watts x 1 @ 2-Ohm
Dynamic Power (PVC/PowerCube®) 260 Watts x 1 @ 4-Ohms 0° Res, 444 Watts x 1 @ 2-Ohms 0° Res
Bridgeable No
Frequency Response 20Hz to 20kHz +/- 1.0dB
Input Sensitivity 150 mV - 12 V
Circuit Topology Class Class A/B
Efficiency (average) 74% @ 4-Ohm
Total Harmonic Distortion (THD+Noise) 4-Ohm: <1.0%, 2-Ohm: <1.0%
Signal Input Hi/Low level: 1 RCA pair
Signal Output Low Level: 1 RCA Pair
Power Wire Gauge 8 AWG to 4 AWG
Power Input Connector Captive C-Clamp
Speaker Wire Gauge 8 AWG to 18 AWG
Speaker Output Connector Captive C-Clamp
Cooling Convection
Operating Voltage 9 - 16 VDC
Recommended Fuse (not included) 50 A
Average Current Draw (13.8V Music) 23 A
Max. Current Draw (13.8V Sinewave) 45 A
Suggested Alternator 75 A
Dimensions (H x W x D) 2.38 x 7.76 x 9.86 (in) 6.05 x 19.71 x 25.04 (cm)
Shipping Weight 9.5 lbs. (4.30 Kg.)
Most Viewed
Connects2 CTMULTILEAD.2 Universal Steering Control Adaptor Stereo Patch LeadWhen used in conjunction with the Connects2 range of Steering Control Adaptors. This cable allows the use of OEM stalk/steer..
$20.00
Factory 4pin Toyota Camera Retention HarnessThe 4 Pin Camera Adapter for Toyota Retains the factory Reverse Camera for your Toyota when you replace the factory stereo with a new aftermarket solution.T..
$45.00
Digital Music Changer for SUBARU vehicles (OEM stereo ONLY, will NOT fit SUBARU with Mcintosh Clarion Head Unit)Compatible models:Forester 2008 - 2013Impreza 2007 - 2011Legacy 2005 - 2009 (GX-201JE no..
$129.00
The Invery airdual 300A is a plug-and-play wireless Bluetooth music adapter designed for original Audi / Mercedes / VW factory fitted iPod kits as well as after-market in-car iPod integration. Instead..
$199.00
DrivePro Universal 7" CarPlay, Android Auto, Bluetooth, USB RadioTop features * Capacitive Screen * Apple Carplay* Android Auto* Bluetooth for handsfree and audio streamingSpecs and features: --------..
$479.00
Sound Magus DK600 CLASS D - 600w RMS MONO AMP - 2Ohm STABLE*****Power Output*****600W x 1RMS (2 OHM, 14.4V)400W x 1RMS (4 OHM, 14.4V)*****Features*****CLASS D MONO BASS2 ohm load stableDouble Side PCB..
$179.00
DrivePro Wireless CarPlay / Android Auto / Screen mirroring Adapter/Dongle for aftermarket Android/Wince RadiosFeatures:* This device will allow you to run Wireless Apple Carplay, Android Auto or Mirr..
$149.00
Stereo installation fitting/trim/fascia kit.Suitable for:=========================• 2 DIN / 173 x 98 mm / 178 x 102 mm• FORD Ranger 2006-2011, Everest 2006-2013• MAZDA BT50 2006-2011 Specs:===========..
$89.00
Stereo installation fitting/trim/fascia kit.Suitable for:=========================• 9" / 230:220 x 130 mm• MAZDA (6), Atenza 2002-2007Specs:=========================• Built in Automatic AC Control Boa..
$299.00
Car Amplifier RCA Bass Gain Level Remote Control Adjustment KnobWant a bass/gain remote control for your amp, but don't have a remote input? Then this is what you need. Simply install this in between ..
$24.90